Filter
Top Products
Organizer
84
Lap timing—You can use the lap time function when you want to track how
long it takes to complete each cycle or lap. Select Lap to note the lap time.
The clock stops, then starts immediately from zero. The lap time appears
below the running time. Each time you select Lap, the new measured time
appears at the beginning of the list.
2. Select Stop to end the timing and display the total time or Stop > Options >
Start or Reset to continue or reset timing.
Lap and split times
To save a time while the clock is running, select Stop > Save, enter a name for the
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
To view a saved time, select Menu > Organizer > Stopwatch > Show last time or
View times.
To delete a saved time from Stopwatch, select View times and the time to delete,
and select Delete > Yes; or select Delete times > One by one or Delete all.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and appears in the upper left corner.
To return to the stopwatch screens, select Menu > Organizer > Stopwatch >
Continue. To stop the clock, select Stop.
Options
You can choose the following options when you use the stopwatch:
Continue—Appears when the stopwatch is working in the background.
Show last time— Appears when you have saved a split or lap time and displays the
last time saved.
Split timing—Asks if you want to discontinue previous timing.
Lap timing—Asks if you want to discontinue previous timing.
View times—Enables you to browse the saved times.
Delete times—Enables you to delete any saved times. You can delete the saved
times one by one or all at once.