Filter
Top Products
9
[ 86 ]
4 Press Start, then speak the voice tag clearly into the microphone.
The phone replays then saves the recorded tag.The icon appears next
to commands which have voice tags assigned.
Use a voice command
Warning! Do not use voice command in an emergency situation.
In emergencies, stress causes changes in your voice, which may
keep the phone from recognizing your voice command.
1 At the Start screen, press and hold Names for one to two seconds. A tone
is heard and Please speak now is displayed.
2 After the tone, clearly speak the voice tag that you recorded previously
into the microphone.
You have two other options for initiating a voice command:
• Press and hold the volume down key for one to two seconds
• Pressing the headset button momentarily at the Start screen has the
same effect as pressing Names for two seconds. The alert tones plays
through the headset.
Speak the voice tag into the headset microphone. The voice tag will
playback through the headset to confirm your choice.
Work with voice tags
You can listen to an existing voice tag (in case you forgot what you
recorded), re-record a voice tag, or erase an existing tag.
1 Press Menu 7-2 (Voice > Voice commands).
2 Scroll to the menu option you wish to tag, then press Select.
3 Press Options, scroll to either Playback, Change, or Erase, and press
Select.
Note: If you chose Change, press Start to begin rerecording. The
new tag that is recorded replaces the old information.