Filter
Top Products
[ 65 ]
Use voice features
7
• AUTOMATE VOICE MAIL WITH DIALING CODES
You can insert special characters called “dialing codes” into phone
numbers such as voice mail and then save the number to a 1-touch
dialing location. Dialing codes instruct the receiving system to pause,
wait, bypass, or accept the numbers that follow them in the dialing string.
See “Use special characters” on page 36.
Important: If you enter your PIN as part of the automated dialing
process, anyone who has access to your phone will be able to
access your voice mail as well. To prevent unauthorized use of your
phone, see “Manage phone security” on page 115.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voice mail service.
Write down some information
1 Write down your voice mailbox number.
2 Call and check your voice mail as you normally would.
Write down your interaction with the recorded prompts. Keep in mind
that each voice mail service may vary. However, it should look
something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, enter
1234, press (pound)
Important: Be precise, you’ll need this information in Setup voice-
mail with dialing codes below.
INSERT DIALING CODES
Press to cycle through available dialing codes. Once the desired
code appears, pause briefly to insert the code into the dialing string. See
“Use special characters” and “In 123 mode” on page 37 for details.