Filter
Top Products
Tools
111
Copyright © 2005 Nokia. All rights reserved.
7 Content is copied from the memory and memory card of the other phone (if available)
to your Nokia 6630. Copying time depends on the amount of data to be transferred. You
can cancel copying and continue later.
Device manager - service provider
configuration
Press and select Tools→ Dev. mgr.. You may receive server profiles and different
configuration settings from your network operator, service provider, or company
information management department. These configuration settings may include access
point settings for data connections and other settings used by different applications in
your phone.
• To connect to a server and receive configuration settings for your phone, select Start
configuration.
• To allow or deny receiving of configuration settings from a service provider, select
Enable config. or Disable config..
Server profile settings
Contact your service provider for the correct settings.
• Server name - Enter a name for the configuration server.
• Server ID - Enter the unique ID to identify the configuration server.
• Server password - Enter a password to identify your phone to the server.
• Access point - Select an access point to be used when connecting to the server.
• Host address - Enter the URL address of the server.
• Port - Enter the port number of the server.
• User name and Password - Enter your user name and password.
• Allow configuration - To receive configuration settings from the server, select Yes.
R0915_en.book Page 111 Tuesday, February 8, 2005 11:46 AM