Filter
Top Products
Connectivity
88
Copyright © 2005 Nokia. All rights reserved.
• My phone's visibility - Shown to all: your phone can be found by other Bluetooth
devices, or Hidden: your phone cannot be found by other devices.
Icons for different
Bluetooth devices:
- Computer
- Phone
- Audio/video
- Headset
- Other
• My phone's name - Define a Bluetooth name for your phone. After you have set
Bluetooth to be active and changed My phone's visibility to Shown to all, your phone
and this name can be seen by other Bluetooth device users.
Sending data using Bluetooth
There can be only one active Bluetooth connection at a time.
1 Open an application where the item you wish to send is stored. For example, to send an
image to another compatible device, open the Gallery application.
2 Select the item, for example an image, and select Options→ Send→ Via Bluetooth.
Tip! When
searching for devices,
some Bluetooth devices
may show only the unique
Bluetooth addresses
(device addresses). To find
the unique Bluetooth
address of your phone,
enter the code *#2820#
in the standby mode.
The phone starts to search for devices within range. Bluetooth enabled devices that are
within range start to appear on the display one by one. You can see a device icon, the
Bluetooth name of the device, the device type, or a short name.
Tip! If you have searched for Bluetooth devices earlier, a list of the devices that
were found previously is shown first. To start a new search, select More devices.
If you switch off the phone, the list is cleared.
• To interrupt the search, press Stop. The device list freezes and you can start to form
a connection to one of the devices already found.
3 Scroll to the device with which you want to connect, and press Select.
4 Pairing (if required by the other device)
Glossary: Pairing means authentication. The users of the Bluetooth enabled devices
should agree what the passcode is and use the same passcode for both devices in order
to pair them. Devices that do not have a user interface have a factory-set passcode.
• If the other device requires pairing before data can be transmitted, a tone sounds and
you are asked to enter a passcode.
• Create your own passcode (1-16 characters long, numeric) and agree with the owner
of the other Bluetooth device to use the same code. The passcode is used only once.
R0915_en.book Page 88 Tuesday, February 8, 2005 11:46 AM