Filter
Top Products
Nokia 6820 User Guide 43 Copyright © Nokia 2004
Contacts
• SPEED DIALING
To assign a number to a speed dialing key, use the following steps:
1 Select Menu > Contacts > 1-touch dialing and scroll to the desired speed dialing
key number.
2 Select Assign.
If a number has already been assigned to the key, select Options > Change.
3 Select Find, and select first the name and then the number you want to assign.
If the 1-touch dialing function is off, the phone gives you the option to activate it.
To make a call using the speed dialing keys, see “Speed dial a phone number” on page 20.
•VOICE DIALING
You can make a phone call by saying a voice tag that has been added to a phone number.
Any spoken word or words, such as a person’s name, can be a voice tag. You can add up to
10 voice tags.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
Before using voice dialing, review the following information:
• Voice tags are not language dependent. They are dependent on the speaker's voice.
• Voice tags are sensitive to background noise. Record them and make calls in a
quiet environment.
• When recording a voice tag or making a call by saying a voice tag, hold the phone in
the normal position near to your ear.
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note: You must say the name exactly as you said it when you recorded it. This may
be difficult in, for example, a noisy environment or during an emergency, so you
should not rely solely upon voice dialing in all circumstances.
Add and manage voice tags
Before you begin, make sure you have the contact names you intend to save with voice tags
set up in the phone memory. You can also add voice tags to the names in the SIM card, but
if you replace your SIM card with a new one, you first need to delete the old voice tags
before you can add new ones. Voice tags use shared memory. For more information, see
“Shared Memory” on page 6.
1 In the standby mode, select Menu > Contacts, scroll to the desired contact, and
select Details.
2 Select Options > Add voice tag.
6820.CENv1_9231553.book Page 43 Tuesday, November 23, 2004 3:50 PM