Filter
Top Products
[ 40 ]
Choose a calling card to use
Note:
If information for only one calling card is stored in your
phone, you are not required to choose a calling card.
1
Press Menu 4 - 1 - 3 (Settings > Call settings > Calling card).
2
Scroll until the name of the calling card appears, and press Options.
3
Scroll to Select, and press OK.
4
Enter your security code, and press OK.
The message Card ready for use appears.
Make a calling card call
Note:
This procedure may not apply to all calling card options.
For more information, refer to your calling card or contact your
calling card company.
1
At the Start screen, enter the phone number of the party you are calling.
Include any necessary prefix, such as 0 or 1, that is specified by your
calling card.
2
Press and hold until the message Card call appears.
3
When the message Wait for tone, then press OK appears, listen for the
tone from your calling card service, then press OK. When the message
Wait for tone, press OK again appears, listen for the tone, then press OK.
• CHOOSE TO BLOCK CALLER ID
In most service areas, when you call someone, their caller ID system allows
them to see your name and phone number. Your phone is set to allow this
information to be seen automatically. Before you make a call, you can choose
to block caller ID and prevent the recipient from seeing your name and
phone number.
NOTES
• This feature works on a per-call basis, so you must perform this procedure
before each call where you want to block caller ID.
• While roaming, you may not be able to block caller ID.