Filter
Top Products
[ 59 ]
Security
Answer a call while the phone is locked
Press any key except or .
Change your lock code
1
Press Menu 4 - 3 - 2 - 3 (Settings > Security settings > Access
codes > Change lock code).
The message Enter lock code appears.
2
Enter the lock code. (The default lock code is 1234, or the last four digits
of your phone number, depending on your service provider.) Press OK.
3
Enter the new lock code. Only numeric characters are accepted. To
prevent accidental emergency calls, don’t enter a code that is similar
to an emergency number.
4
Press OK.
5
Verify the new lock code, and press OK. Store your new code in a safe
place, away from your phone.
• USE KEYGUARD TO LOCK THE KEYPAD
The Keyguard feature lets you lock the keypad to prevent accidental key
presses while your phone is in a pocket or purse. If you press a key while
Keyguard is activated, a message appears: Press Unlock and then *.
Note:
When Keyguard is on, it may be possible to make emergency
calls (for example, 911, or other official emergency number). Key in
the emergency number and press . The number is displayed
only after you have keyed in its last digit.
Activate keyguard
• Press and hold until Keys locked appears. (If you do this
during a call, the call will end.), OR...
• At the Start screen, press Menu , OR...
• At the Start screen, press Menu 1 - 0, OR...
• At the Start screen, press Menu. Scroll to Keyguard, and press Select.