Filter
Top Products
13
■ Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and
select OK.
If the phone asks for the lock code, enter the lock code, and
select OK. The factory setting for the lock code is 12345.
■ Set time and date
To set the correct time zone, time, and date, select the
country you are presently in, then enter the local time and date.
■ Normal operating position
Use the phone only in its normal operating position.
Note: As with any radio transmitting device, avoid touching
an antenna unnecessarily when the antenna is in use. For
example, avoid touching the cellular antenna during a
phone call. Contact with a transmitting or receiving
antenna affects the quality of the radio communication,
may cause the device to operate at a higher power level
than otherwise needed, and may reduce the battery life.
Your device has internal antennas.
Cellular antenna (1)
Bluetooth antenna (2)
■ Configuration settings
Before you can use multimedia messaging,
instant messaging, push to talk, e-mail,
synchronization, streaming, and the browser,
you must have the proper configuration
settings on your phone. Your phone may automatically configure browser,
multimedia messaging, access point, and streaming settings based on the SIM
card used. You may also receive the settings directly as a configuration message,