Nokia RM-230 Cell Phone User Manual


 
77
Show call duration—to set the phone to display the call duration during a call
Summary after call—to set the phone to briefly display the approximate duration
of the last call
Speed dialling > On—to set the phone to dial the numbers assigned to the speed
dialing keys, 2 to 9, by pressing and holding the corresponding number key
Anykey answer > On—to answer an incoming call by briefly pressing any key,
except the right selection key, volume keys, and the end key
Line in use (network service)—shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you
want to use for making calls and sending short messages.
Calls on both lines can be answered irrespective of the selected line. You cannot
make calls if you select Line 2 and have not subscribed to this network service. To
prevent line selection, select Line change > Disable if supported by your SIM card.
To change this setting, you need the PIN2 code.
Call divert
Call divert is a network service.
1. Select which calls you want to divert: Voice calls, Data and video calls, or Fax
calls.
2. Select the desired option. For example, to divert voice calls when your number
is busy or when you reject an incoming call, select If busy.
3. To set the divert option on or off, select Options > Activate or Cancel. To check
whether the option is activated, select Check status. Several divert options can
be active at the same time.
Call barring and call diverting cannot be active at the same time.
Call barring
Call barring (network service) allows you to restrict the calls that you make and
receive with your phone. To change the settings, you need the barring password
from your service provider.
Scroll to the desired barring option, and to request the network to set call
restriction on, select Options > Activate. To set the selected call restriction off,
select Cancel. To check whether the calls are barred, select Check status. To
change the barring password, select Edit barring password. To cancel all active call
barrings, select Cancel all barrings.
Call barring and call diverting cannot be active at the same time.