Nokia RM-230 Cell Phone User Manual


 
50
The radio station and your service provider must support this service.
Your internet access point must be defined for access to the network
operator’s Visual Radio server.
The radio station must have the correct Visual Radio service ID defined and
have Visual Radio service enabled.
Visual Radio cannot be started when the phone is in the offline mode.
The FM radio depends on an antenna other than the wireless device antenna. A compatible
headset or enhancement needs to be attached to the device for the FM radio to function
properly.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
You can make a call or answer an incoming call while listening to the radio. The
radio is turned off when there is an active call.
To open Visual Radio, select Menu > Media > Radio.
To turn the radio off, select Exit.
Tune and save a radio station
To start the station search when the radio is on, select or . Searching stops
when a station is found. To save the station, select Options > Save station. Select
a location for the station. Enter the name of the station, and select OK.
Radio functions
To adjust the volume, press the volume keys.
Select or to scroll to the next or previous saved station. The buttons are
inactive if there are no saved stations.
When using a compatible headset, press the headset key to scroll to the next
saved radio station.
To save the current station, select Options> Save station, a preset position, and
enter the station name.
To set the station frequency manually, select Options > Manual tuning.
To listen to the radio in the background and go to the standby mode, select
Options > Play in background.