Filter
Top Products
107
User Message
Displays your voice message set for the response message.
Press the [ ] key for playback. If no message is recorded,
only the recorder function will be used.
106
Auto Answer
The Auto Answer function works like an automatic answering
machine. It relays the recorded message to the caller if you
do not answer the call for a specified period of time.
Auto Answer
Set Auto Answer to [On/Off]. If set to [On], the Auto Answer
function will be enabled.
Recorded Message
Displays a list of recorded messages during call active (In
call). Each list displays the recorded date & time of the file
and the message caller ID as well. Press [Delete] to delete
the message in the View list, and press the [Send] key to
make a call while confirming recorded messages.
Response Message
Depending on your current situation, a different answering
message will be played, including. [Absent / Meeting / Driving
/ User Message]. The User Message is the voice message of
the local user that will be answered in the standby mode.
Response time
Sets the automatic answering time (3 secs / 5 secs / 10 secs
/ 20 secs). When the response time elapses without
answering the incoming call, the recorded message will be
relayed to the caller. If the caller decides to leave a voice
message, recording will be started with a beep sound.