Pantech PG-3500 Cell Phone User Manual


 
2726
SIM Card
Installing the battery [4.1]
Put the contacts of the battery into
the hole located at the bottom of the
unit, as shown in the figure below.
Press the upper side of the battery
until you hear a “click” sound.
Removing the battery [4.2]
Push the battery lock button up
and remove the battery.
Charging the battery [4.3]
This phone uses a Li-ion battery.
Make sure to use an authorised
battery and charger only. For more
details, please inquire at your
nearest dealer.
You can use the phone during
battery recharging.
When the battery is mounted within
the phone, open the cover located
at the bottom of the phone and
connect the adapter. An adapter is
provided with the phone.
Using the battery
SIM Card [3.1]
When you subscribe to your network operator, you will get a
SIM (Subscriber Identity Module) card containing your
registration information. (PIN), the existence of additional
service, etc.
Like a credit card, it should be kept secure and handled
carefully.
Do not bend, scratch or expose it to moisture.
Avoid static electricity.
To avoid memory corruption of your SIM card, always
switch off your phone before removing or inserting your SIM
card.
Installing/Removing the SIM card [3.2]
1
Remove the battery from the unit.
2
If the SIM slot is empty, insert the
SIM card into the slot.
3
If you want to remove the SIM
card, pull the SIM card holder as
the arrow direction, pull the SIM
card in the arrow direction as
shown in the picture.