Filter
Top Products
3. Press the soft button. The speakerphone will turn on and you will
hear the dial tone.
4. Enter the telephone number and the number dialed will begin to ring..
Making an Outbound Intercom Call
During an incoming or intercom call ring, the user can ignore the call and make an
outbound intercom call.
1. Press the soft button.
2. Press 5 or 6 on the Navigation button until “Intercom” appears on the display.
3. Press the soft button. The display will prompt you for the extension
number.
4. Enter an extension number (01-16) to page the extension.
5. If the page is answered, this becomes an intercom call.
Voice Mail (VM)
Every Cordless Handset connected to the system has its own voice mailbox. Each
Cordless Handset has a mailbox number that is the same as it’s ID/extension number.
The system can hold up to 100 minutes of messages with each message having a
limit of sixty-four 64 seconds.
NOTE: The default password is “0000”. Use this password when setting up voice mail for the
first time, or after the password has been reset by the administrator.
Configure VM
Reset Extension Password(s)
This feature allows the user to reset any extension password to it’s default “0000”
password using the Base Unit. This feature is useful if an extension password has
become unknown.
Advanced Functions, Systems and Settings
31