Filter
Top Products
^ white (reversed)
WHITEVERSIONREVERSED
www.cingular.com/tutorials/blackberrypearl
WHITEVERSIONREVERSED
Make a Push to Talk Call
Set Up
1. On the Home screen, click the PTT icon or activate PTT by pressing the
PTT Key on the left side of the phone (Left Side Convenience key).
2. Select Yes when asked if you want to initialize PTT.
3. When asked to, enter a name (up to 20 characters) and select OK.
4. Once initialization is complete, (it can take a few minutes), PTT is
ready for use and an icon will appear near the top of the home screen.
Make a Push to Talk Call
Set Up Voicemail
Set Up Voicemail
Steps?
3
Takes?
2 minutes
Check Your Voice Mail
Messages From Other
Phones:
1. Dial your 10-digit
wireless number.
2. Press the
*
key
when you hear your
personal greeting;
( Press the # key for
Puerto Rico)
3. Enter your personal
passcode.
4. Follow the voice
prompts.
Note:
You must have a PTT
subscription to set up
the PTT service.
To confirm PTT is
activated select the
PTT icon on your
home screen, the
bottom of the screen
should read PTT
is On.
Steps?
3
Takes?
1 minute
Press and hold the 1 key on your BlackBerry device. You will be
connected to the voicemail system, which will then ask you to:
1. Create your password
2. Record your name
3. Record a greeting
Check Your Voice Mail Messages
From Your BlackBerry Device
1. Press and hold the 1 key.
2. Follow the voice prompts.
2120
Add a Push to Talk Contact
Verify that the contact subscribes to Cingular Push to Talk service.
When you add a Push to Talk contact, you invite the contact to join your
contact list. The contact can accept, decline, or defer your invitation.
1. On the PTT Menu screen, click Add Contact.
2. Type the contact information.
3. Click OK.
Get Started Using the BlackBerry Pearl
Make a Push to Talk Call
1. On the PTT Menu screen, click PTT Contacts.
2. To speak or listen, perform one of the following actions:
a. To speak, hold the Left Side Convenience key.
b. To listen, release the Left Side Convenience key.
To end the Push to Talk call, hold the End key.