Filter
Top Products
135
Once the correct password is entered, you can use the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when you switch on the
phone.
• Enable: you are required to enter the phone password when you switch on the
phone.
Change password
The Change password feature allows you to change your current phone password to
a new one. You must enter the current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once you enter a new
password, you are asked to confirm the change by entering the password again.
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your
password, contact your Service Provider for assistance.
Lock application
With this feature you can lock your applications which provide access to information
such as call records, phonebook, messages, images, and sounds. Once you lock the
contents, you must enter the phone’s password to access the associated menus.
1. Press the Up or Down Navigation key to select an item to lock
2. Press the key to place a check mark on the selected item.
• To lock all of the contents, select Lock all.
3. Highlight the previously selected item and press the key to remove a
check mark.
4. Press the Save soft key to lock the marked items.
5. Enter a password and press the OK soft key or the key.
Note: The password is preset to “00000000” at the factory. To change this password, see "Change
password" on page 135.