Filter
Top Products
29
11.
Press the Down key to highlight the Connection Setting option. Press the
Left or Right key to set to Automatically Connect, Don't Automatically
Connect, or Ask Before Connecting.
12. Press the Down key to highlight the Non-Broadcast SSID option. Press
the key to place a checkmark in this box if your router does NOT
broadcast its SSID. In general, the default setting for most routers will
broadcast the SSID.
13. Press the Down key to highlight the Inter AP handovers option. Press the
key to place a checkmark in this box if you can connect to multiple
Wi-Fi access points (AP) and would like your phone to switch automatically
(while on a call) when leaving one Wi-Fi zone and entering another nearby
Wi-Fi zone.
14. Press the Down key to highlight the IP setting option. Press the Left or
Right key to set to Dynamic or Static. Dynamic is the standard and
recommended setting.
If you select Static in this step, press the Down key to highlight the IP
address
option. Press the key to enter the IP address menu. If you
are using a T-Mobile Router, copy the information regarding the Subnet
Mask, DSN Server, and Gateway from your router into your phone. The IP
address you input must be different from the one you use to access the
router. If you are connected to a Wi-Fi network that requires Static IP
addresses (usually in a corporate environment), please see your System
Administrator to get the required information.
15. When finished, press the Save soft key.
Troubleshooting
This section provides resources for determining solutions to problems or issues that
may occur with your T-Mobile Wi-Fi compatible phone.
T-Mobile Wi-Fi Help
Use the following steps to select the Wi-Fi Help option from the Wi-Fi menu and get
specific Wi-Fi assistance.:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to Settings. Press the Select soft key to
enter the menu.
3. Highlight the Wi-Fi option and press the Select soft key.
4. Highlight the Wi-Fi Help option and press the Select soft key.