Filter
Top Products
61
•
If you need to re-record, say “
No
.”
If you say “No,” the phone prompts you to pronounce
the digits again. Wait for the beep and then say the
digits.
Repeat this step until you’re satisfied with the recording.
5. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
6. After 10 sets of digits, the phone asks whether you want
to do more adaptation. Answer “
Yes
.”
7. Repeat steps 4 and 5 for another 10 sets of digits. After
the second group of 10 sets of digits, “
Adaptation
complete
” plays through the speaker and you are
returned to the
Digit Dialing
menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press
Menu
➔
Voice SVC
➔
Voice
Settings
➔
Digit Dialing
. The following options appear in
the display:
• Adapt Digits
• Reset Digits
2. Highlight
Reset Digits
, then press . The phone
prompts you to confirm digit reset.
3. Press
OK
or to reset your digit adaptation, or press
Back
or to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. In standby mode, press
Menu
➔
Voice SVC
➔
Voice
Settings
➔
Sound
. The following options appear in the
display:
•Prompts
— On/Off — Enables or disables audio prompts.
•Digits
— On/Off — Enables or disables digit playback.
•Names
— On/Off — Enables or disables name playback.
• Name Settings
— Lets you adjust the
Speed
(Faster or Slower)
and
Volume
(Louder or Softer) of your phone’s audio name
playback.
2. Highlight the desired option, then press .
3. Highlight the desired setting.
4. Press
OK
or to accept the new setting. Press
to discard the new setting and return to the
Voice
Settings
menu.