Filter
Top Products
Getting connected
159
1. On the Home screen, press the
Start
soft key and select
Settings
→
More...
→
Connections
→
More...
→
Wi-Fi
→
New...
2. Enter a network name and select a network type.
3. If you are creating an Ad Hoc network, check
This is a
device to device (ad-hoc) connection
and press the
Next
soft key.
If you do not select this option, the network is added as
an access point network.
4. Set authentication options, enter a network key, set an
index number for the key, and press the
Finish
soft key.
5. For an access point network, set whether to use IEEE
802.1x network access control select an EAP type, and
press the
Finish
soft key.
Managing Wi-Fi networks
From the available Wi-Fi network list, you can check the
status of the networks you have saved and change a
network’s properties.
On the list, the following icons may appear to indicate the
device status.
• : Secured AP connection
• : Ad Hoc (Device to Device) connection
• : Non-secured AP connection
Press the
Menu
soft key and select
Edit
to change the
network properties or
Delete
to remove the network from
the list.