Filter
Top Products
76
connectivity
3. Search for and pair with a Bluetooth-enabled phone.
To receive data using the Bluetooth wireless feature:
1. In Idle mode, select Applications Settings
Wireless and network Bluetooth settings
Visible.
Your phone is visible to other Bluetooth phones for 120
seconds.
2. When prompted, enter the PIN for the Bluetooth
wireless feature and select OK (if necessary).
3. If necessary, select Accept to confirm that you are
willing to receive data from the other phone.
Received data is saved to the appropriate application or to a
folder according to its type. For example, a music or sound
clip is saved to the sound folder and a contact to the
phonebook.
Wi-Fi
You can use your phone’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network phones
anywhere an access point or wireless hotspot is available.
To activate the WLAN feature:
1. In Idle mode, select Applications Settings
Wireless and network Wi-Fi settings.
2. Select Wi-Fi to turn on the wireless networking feature.
A green check mark appears at the right side to indicate
that it is turned on.
Your phone uses non-harmonized frequency and
therefore some countries might restrict the use of a
WLAN.