Filter
Top Products
90
2. To create a new connection, press
(New
) or
press
Options, select
Create, and press
(Select
)
or the
key. To edit an existing connection, press Options, select
Edit,
and press
(Select
)
or the key.
3. Enter or edit the following parameters as required. They may or
may not appear depending on the Network Profile that was
selected:
•
Set name
: enter a profile name.
•
Access name
: edit the access point name.
•
Auth type
: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
•
User ID
: enter the User ID required to connect to the network.
•
Password
: enter the user password required to connect to
the network.
•
Protocol
: set the connection protocol used by the WAP
browser: WAP, HTTP, or Other.
•
Home URL
: enter the URL address of the page to use as
your homepage.
•
Proxy Address
: This option only appears when the Protocol is
set to HTTP.
• Gateway Address: Enter the Gateway Address. This option
only appears when the Protocol is set to WAP.
• Secure connection: Select On or Off depending on whether
or not you have a secure connection. This option only appears
when the Protocol is set to WAP.