Filter
Top Products
Controlling Roaming Charges Using Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take an additional step before placing or answering
a roaming call. This additional step is not required when you make or
receive calls while on the Sprint Nationwide PCS Network.
To turn Call Guard on or off:
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Roaming and press .
4. Highlight Call Guard and press .
5. Select On or Offand press .
Note:Voice Dialing and Speed Dialing are not available when you are roaming
with Call Guard enabled.
To place Roaming Calls with Call Guard on:
Ⅵ
Press any key to erase the pop-up message, then press ,
highlight Roam Call or Roam:Speaker On, and press .
– or –
1. From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the internal Phone
Book, Call History, or Messaging.)
2. Press or (or press and highlight Call or
Call:Speaker On) and press .
3. Press to proceed while the pop-up message is displayed.
To answer incoming Roaming Calls with Call Guard on:
Ⅵ
Press , highlightAnswer or Answer:Speaker, and press .
– or –
1. Press or .
2. Press to proceed while the pop-up message is displayed.
Remember, if the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls even if you have
selected the Analog setting (see previous page).
Section 2: Understanding Your PCS Phone
2D: Controlling Your Roaming Experience 67