Sanyo RL-4920 Cell Phone User Manual


 
Receiving a PCS Ready Link Call (1-to-1 Call)
1. Make sure your phone’s PCS Ready Link mode is enabled (see
“Setting PCS Ready Link Mode” on page 130).
2. When you receive a PCS Ready Link call from a contact, “R-Link
Call,” the contact’s name,and the PCS Ready Link number
appear on the display.(You do not need to take any action to
answer the call.)
3. If the person placing the call has kept the floor (held the
Ready Link/Recorder button),you will see the contact name
and PCS Ready Link number along with “has floor.”,and you will
hear the caller speaking.
4. When the caller finishes speaking and releases the
Ready Link/Recorder button,you will see “Floor is open.” on the
display screen. Press and hold to take the floor and reply to
the caller. (You will see “You have floor.” and hear a tone
confirming that you may speak.)
5. When the conversation is finished,press .
Receiving a PCS Ready Link Call (Group Call)
1. When you receive a PCS Ready Link call from one of the group
members, “Group Call,” the group member’s name,and the
PCS Ready Link number appear on the display.
2. Continue with the PCS Ready Link call as described previously.
3. When the conversation is finished,press .
Section 2J: Using PCS Ready Link 136