Sanyo RL-4920 Cell Phone User Manual


 
Net Guard
When you first connect to the Web,the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections.You can disable the Net Guard in the future
by selecting Always Auto-Connectwhen the Net Guard is displayed.
To change your Net Guardsettings:
1. Press to access the main menu.
2. Select Settingsand press .
3. Select PCS Vision and press .
4. Select Net Guardand press .
5. Select Onor Offand press .
On to activate the Net Guard.
Off to deactivate the Net Guard.
Note:When enabled, the Net Guard appears only once per session. The Net
Guard does not appear if the phone is merely re-connecting due to a time-out.
PCS Vision Connection Status and Indicators
Your phone’s display lets you know the current status of your
PCS Vision connection through indicators which appear at the top
of the screen. The following symbols are used:
Your PCS Vision connection is active (data is being transferred);
the transmit/receive symbol will blink to indicate data
transmission. Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the PCS Vision
connection will terminate.
Your PCS Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly;voice calls can
be made and received.
Your phone is not currently able to access PCS Vision service
features.
If no indicator appears,your phone does not have a current
PCS Vision connection.To launch a connection,see “Launching a
PCS Vision Connection”on the previous page.
Section 3B: PCS Vision 166