Filter
Top Products
Not for commercial use – Ericsson Inc.
:LUHOHVV0RGHP2SHUDWLRQ
Note! If neither the New Hardware Found nor the Update Device
Driver Wizard screens appear, refer to the Manual Installation
Instructions at the end of this chapter.
4 When your desktop returns, verify that your modem is properly
installed. From the Start menu on your Windows desktop, click
on Settings, then Control Panel. Double-click the Modems icon.
5 When the Modem Properties screen appears, click on the
description of your modem and click the Diagnostics tab. Note
the COM port to which your modem is assigned.
6 Click OK to proceed.
:LQGRZV
Complete the following steps to install the INF file on your
computer if you are running Windows 98:
1 Turn On your Ericsson mobile phone.
2 Connect one end of your serial cable to your Ericsson mobile
phone and the other end to your computer’s serial port.
3 Restart your computer. Windows will autodetect your Ericsson
mobile phone. When your desktop returns, insert the compact
disc from your Ericsson Connectivity Kit.
4 When the Add New Hardware Wizard screen appears, click
Next.
Note! If the Add New Hardware Wizard screen does not appear, refer
to the Manual Installation Instructions at the end of this chapter.
5 Select Search for the best driver for your device
(recommended) and click Next.
6 Select the appropriate CD-ROM drive and click Next.
7 When Windows is now ready to install the best driver for this
device appears, click Next.
8 When Windows has finished installing the software that your
new hardware device requires appears, click Finish.
9 When your desktop returns, verify that your modem is properly
installed. From the Start menu on your Windows desktop, click
on Settings, then Control Panel. Double-click the Modems icon.
10 When the Modem Properties screen appears, click on the
description of your modem and click the Diagnostics tab. Note
the COM port to which your modem is assigned.
11 Click OK to proceed.
0DQXDO,QVWDOODWLRQRI<RXU0RGHP'ULYHURU
9RLFH&DOO'LDOHU
Complete the following steps to manually install the INF file on
your computer if you are running Windows 95/98.
1 Turn On your Ericsson mobile phone.
2 Connect one end of your serial cable to your Ericsson mobile
phone and the other end to your computer’s serial port.
3 From the Start menu on your Windows desktop, click on
Settings, then Control Panel. Double-click the Modems icon.
4 Click Add.
5 At the Install New Modem screen, select Other. Click Next.
6 At the next Install New Modem screen, select Don’t run
Hardware Installation Wizard then click Next.
'LWWR/LQGDERRN3DJH:HGQHVGD\1RYHPEHU30