Filter
Top Products
Daylight – adjusts the colour balance for outdoor use
Cloudy – adjusts the colour balance for a cloudy sky
* No icon appears when this function is activated.
To set the white balance in photo mode
1
Activate the camera and tap .
2
Select Photo > White balance.
3
Select an option.
Image stabiliser
The image stabiliser compensates for small movements of the hand to ensure steady
photos. When you turn on this function, appears in the viewfinder.
To activate the image stabiliser
1
Activate the camera.
2
Tap .
3
Select Photo > Image stabiliser > On.
Effects
Before taking photos or recording video clips, you can set and view different effects.
Off* – for normal photos
Negative – invert red, green and blue separately, and to varying degrees
Solarise – add an artificial effect to your photo
Sepia – give the photo a brown tint so it appears older
Black & white – take black and white photos
* No icon appears when this function is activated.
To set effects in photo mode
1
Activate the camera and tap .
2
Select Photo > Effects.
Shutter sound
Before taking a photo, you can select or mute a shutter sound.
Shutter sound 1-4 select one of four shutter sounds
Off
take photos without a shutter sound
To set the shutter sound
1
Activate the camera and tap .
2
Select Photo > Shutter sound.
Location information
When
appears on the screen, your geographical position is saved with the photos you
take. This is called geotagging. Geotags show the approximate location of where a photo
was taken.
To add location information to a photo
1
Activate the camera and tap .
2
Select Setup > Geotag > On.
47
This is an Internet version of this publication. © Print only for private use.