TOA Electronics A920 Cell Phone User Manual


 
112 Section 2H: Using Your Phone’s Voice Services
To adapt Digit Dial to your voice:
1. Menu > Settings > Voice Service.
2. Select Digit Dialing and press .
3. Select Adapt Digits and press to begin. (The phone
displays the first digit sequence.)
4. Wait for the beep, and then repeat the digits using a
normal tone of voice. (The phone plays back your
recording and asks you if the recording sounds “OK.”)
5. If the recording sounds OK (no mistakes and no
background noises), say Yes.
6. If you need to rerecord the digits to fix any problems,
say No. (The phone then prompts you to say the digits
again.)
7. Wait for the beep, and then record the digits again.
(Repeat this step until you are satisfied with the
recording.)
8. After confirming that the recording sounds OK, repeat
the recording process with the next set of digits. (After
six sets of digits, the phone will ask you whether you
want to do more adaptation. Answer Yes .)
9. Repeat steps 6-9 for another six sets of digits. (After the
sixth set of digits, you will be halfway through the
session and the phone will ask “More Adaptation?”)
10. Select OK to continue for six more sets of digits, or press
for partial adaptation. When you are finished with
a full session, you will reach a screen that reads,
“Adaptation Complete.”