4600 Series IP Telephone Installation Guide
Static Addressing Installation
3-8
Reset System Values
3
Use the following procedure to reset all system initialization values to the application software
default values.
WARNING:
This procedure erases all static information, without any possibility of recovering the data.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Hold 7 3 7 3 8 # (Hold R E S E T #)
The following text is displayed left-justified at the top of the display:
WARNING:
As soon as you press the # button, all static information will be erased, without any
possibility of recovering the data.
2. Press the # button to reset values to their defaults or the * button to continue.
The following text is displayed left-justified at the top of the display while the system values are
reset to defaults:
Once the system values are reset, the following prompt is displayed:
3. Press the * key to terminate the procedure without restarting the telephone.
Restart the Telephone
3
Use the following procedure to restart the telephone.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Hold 7 3 7 3 8 # (Hold R E S E T #)
The following text is displayed left-justified at the top of the display:
2. Press the # button to reset values to their defaults, or * to continue.
Reset values?
*=no #=yes
Resetting
values.
Restart phone?
*=no #=yes
Reset values?
*=no #=yes
