4600 Series IP Telephone Installation Guide
The View Administrative Option
4-2
DTMF Tones
4
The failure to hear DTMF tones sent by a far-end 4600 Series IP Telephone does not require any
action on the user’s part. The TN2302AP board does not pass in-band DTMF tones.
Power Interruption
4
If power to a 4600 Series IP Telephone is interrupted while the telephone is saving the application
file, the TFTP application may hang. If this occurs, restart the TFTP server.
The View Administrative Option
4
If you are using static addressing and encounter problems, use the following procedure to verify
the current values of system parameters and file versions.
1. While the phone is on-hook and idle, press the following sequence of keys on the faceplate of
the telephone:
Hold 8 4 3 9 # (Hold V I E W #)
The following text is displayed left-justified at the top of the display:
2. Press the * button at any time during viewing to display the next name and system value pair
from the list below, returning to the first pair after the last pair has been displayed.
Press the # button at any time during viewing to terminate the procedure and restore the user
interface to its previous state.
The names and values are displayed in the following order:
Also use the ADDR option to view IP addresses (see ‘‘Static Addressing Installation’’
on page 3-2). These may have been entered incorrectly. Verify whether you were
provided with correct IP addresses.
View settings
*=next #=exit
Table 4-1. Parameter Values
Name System Value Format
Model
46ccDccc
up to 8 ASCII graphics characters
Market
domestic
export
Only one value is displayed
Phone SN
cccccccccccc
cccccccc
Phone Serial Number, up to 18 ASCII graphic
characters
