Appendix
Scenarios for the Restart Process
A-5
Latest Boot File Loaded/No Application File or
Application File Needs to be Upgraded
4
1. The following message is displayed:
2. While the hardware is being initialized, the following message is displayed:
3. While either the application file (if there is one) or the boot code is uncompressed into RAM,
the following message is displayed:
Since this takes a while, asterisks, then periods, then asterisks are displayed on the second
line to indicate that something is happening.
4. When control is passed to the code in RAM, the following message is displayed:
5. The telephone detects and displays the speed of the Ethernet interface in Mbps (that is, 0, 10
or 100). The message No Ethernet is displayed until the software determines whether the
interface is 10 Mbps or 100 Mbps.
6. The software checks whether sufficient IP address information has been downloaded. In this
scenario, it is discovered that sufficient information has not been downloaded. The following
message is displayed while the DHCP process is invoked:
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
This happens with normal application file upgrades.
Restarting...
Initializing
Loading
....************
Starting...
The Ethernet speed indicated is the LAN interface speed for both the telephone and
any attached PC.
DHCP: 0 secs
* to program
