4600 Series IP Telephone Installation Guide
Scenarios for the Restart Process
A-4
13. While either the new application file is uncompressed into RAM, the following message is
displayed:
Since this takes a while, asterisks, then periods, then asterisks are displayed on the second
line to indicate that something is happening.
14. When control is passed to the software that was just loaded, the following message is
displayed:
15. While the entire flash memory is erased in preparation for rewriting the code, the following
message is displayed:
where n is the percentage of memory erased and x is the number of elapsed seconds during
erasing.
16. While the boot code is rewritten, the following message is displayed:
where n is the percentage of boot code rewritten and x is the number of elapsed seconds
during rewriting.
17. When the new boot code has been successfully written into the flash memory, the application
corrupts its own checksum stored in flash and resets the phone so that the latest system-
specific application file can be downloaded.
18. Continue with the next procedure.
Loading
....************
Starting...
Clearing...
n%, x secs
Updating...
n%, x secs
