Note: This would be a good time to record the present system settings using the worksheet
provided in Appendix B.
At this point, if you have decided NOT to complete the reset action, you may press the
Cancel button
©
and return to the previous menu.
To proceed with the reset you have selected, simply press the Menu button
˙
and a screen (Figure
OSD-37, OSD-38, OSD-39 or OSD-40), depending on the type of reset selected will appear,
indicating that the reset has been accomplished.
Figure OSD-37 Figure OSD-38
Figure OSD-39 Figure OSD-40
If you have selected either Modes, Programs or Calib Params to reset, you will automatically
be returned to the System Reset menu after a few seconds, from which you may exit by pressing
either the Menu button
˙
or the
‹
Menu Control button .
If you have selected System Reset, figure OSD-40 (above) will appear, instructing you to
press the Menu button
˙
, at which time the unit will go to Standby, completing the resetting of
all parameters. When the 5.0 is next turned on, it will operate as it did when it was first installed
in your system.
The Unit will now go
into Standby to complete
the Reset operation
Press MENU to Continue
Calib Params Reset
to Factory Default
ALL Programs Reset
to Factory Default
ALL Surr Modes Reset
to Factory Default
61
Advanced Features
