182 Running the System Diagnostics
Embedded System Diagnostics Features
The embedded system diagnostics provides a series of menus and options for
particular device groups or devices. The system diagnostics menus and
options allow you to:
• Run tests individually or collectively
• Control the sequence of tests
• Repeat tests
• Display, print, or save test results
• Temporarily suspend testing if an error is detected or terminate testing
when a user-defined error limit is reached
• View help messages that briefly describe each test and its parameters
• View status messages that inform you if tests are completed successfully
• View error messages that inform you of problems encountered during
testing
When to Use the Embedded System Diagnostics
If a major component or device in the system does not operate properly,
component failure may be indicated. As long as the microprocessor and the
system's input/output devices are functioning, you can use the system
diagnostics to help identify the problem.
Running the Embedded System Diagnostics
The system diagnostics program is run from the Unified Server Configurator
(USC) screen.
CAUTION: Use the system diagnostics to test only your system. Using this
program with other systems may cause invalid results or error messages.
1
As the system boots, press <F10>.
2
Click Diagnostics in the left pane and click Launch Diagnostics in the
right pane.
The Diagnostics menu allows you to run all or specific diagnostics tests or to
exit.
book.book Page 182 Monday, June 15, 2009 11:33 AM
