ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Playback
(Basic)
Troubleshooting
Other
Information
Spec. Index
Part
Names
Presetting Radio Stations (Manual Preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset. Multicasts can also
be preset.
Stations can be preset automatically at “Auto Preset” (vpage
48). If “Auto Preset” is performed after performing “Manual Preset”,
the “Manual Preset” settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
Rear
Front
2
Press MEMO.
3
Press SHIFT to select the block (A to
G) in which the channel (1 to 8 per
a block) is to be preset, then press
CHANNEL +, – or 1 – 8 to select the
preset number.
4
Press MEMO again to complete the
setting.
To preset other stations, repeat steps 1
to 4.
Default Settings
Block (A – G)
and
Channel (1 – 8)
Default Settings
A1 – A8
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
B1 – B8
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
C1 – C8 90.1 MHz
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a Name for the Preset Broadcast Station
(Preset Name) (vpage 48)
•
n
n
Listening to Preset Stations
1
Press SHIFT to select the memory
block.
Rear
Front
2
Press CHANNEL +, – or 1 – 8 to
select the desired preset channel.
You can also operate via the main unit. In this
case, perform the following operations.
Press PRESET + or PRESET – to select the
preset radio station.
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH.
Rear
2
Input frequencies using 0 – 9.
If o is pressed, the immediately preceding
input is cancelled.
•
3
When setting is completed, press
ENTER.
The preset frequency is tuned in.
Tuning in Radio Stations
Listening to FM/AM Broadcasts
1
Press TUNER to select “FM” or
“AM”.
Front
FM
AM
When listening to an FM broadcast.
When listening to an AM broadcast.
2
Tune in the desired broadcast
station.
q To tune in automatically (Auto Tuning)
Press MODE to light the “AUTO” indicator
on the display, then use TU d or TU f to
select the station you want to hear.
To cancel Auto tuning, press TU d or
TU f.
w To tune in manually (Manual Tuning)
Press MODE to turn off the display’s
“AUTO” indicator, then use TU d or TU f
to select the station you want to hear.
•
Adjusting the Master Volume (vpage 28)
Press VOL df.
If the desired station cannot be tuned in with auto tuning, tune it in
manually.
When tuning in stations manually, press and hold TU d or TU f to
change frequencies continuously.
n
•
•
