ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Playback
(Basic)
Playback
(Basic)
The resume function remains valid even when the standby mode
is set.
The resume function is cancelled when the power is turned off by
unplugging the power cord.
NOTE
The resume function does not work with menu playback or BD-J
(Blu-ray Disc Java) compatible disc.
Pause Playback
During playback, press 3.
The 3 indicator will light on the display.
Resume normal playback by pressing 1. •
Front
Step-by-Step Playback
During pause, press 3.
The disc advances frame by frame each time
the button is pressed.
Resume normal playback by pressing 1. •
Front
NOTE
Step-by-step reverse playback is not available with this unit.
•
•
•
Basic Operation
Adjusting the Master Volume (vpage 28)
Stop Playback (vpage 28)
Pause Playback (vpage 28)
Step-by-Step Playback (vpage 28)
Fast Forward/Fast Reverse Playback
(vpage 29)
Slow Forward/Slow Reverse Playback
(vpage 29)
Skipping to the Chapter/Track/File (vpage 29)
Random Playback (vpage 29)
Repeat Playback (vpage 29)
Switching Audio (vpage 30)
Switching the Angle (vpage 30)
Changing the Subtitles and Subtitle Style
(vpage 31)
n
n
n
n
n
n
n
n
n
n
n
n
Surround Mode (vpage 31)
Playback (Basic) (vpage 18)
Playback (Advanced) (vpage 37)
Performance of the following operations can
sometimes result in video discontinuities.
Pause Playback
Step-by-Step Playback
Slow Forward/Slow Reverse Playback
•
•
•
If this happens, stop playback, then press SETUP and on the GUI menu
switch “Display Setup” – “Still Mode” to “Field” (vpage 46).
Adjusting the Master Volume
Press VOL df to adjust the volume.
GVariable rangeH
0 – 99
The variable range differs according to the
input signal and channel level setting.
•
Front
You can also operate via the main unit. In this
case, perform the following operations.
Use VOLUME to adjust the volume.
Stop Playback
During playback, press 2.
Playback stops.
Front
About Resume Functionn
When playback is stopped, the stop position is memorized.
The 1 indicator flashes on the display. When playing back
data from the stop position, press 1 while stop by the resume
function.
To Cancel the Resume Function
Perform one of the following operations.
During stop, press 2.
Change the playback media mode with BD/SD.
Open the disc tray.
Remove the SD memory card.
•
n
•
•
•
•
The icons show the category of
content applicable to each operation.
Video Audio Photo
For details of the media corresponding to each icon, see “Playable Media”
(vpage 19).
