ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Playback
(Basic)
Playback
(Basic)
When the Multi-channel Source is Surround
Playback
When the “Speaker Assign” setting on the GUI menu is “5.1CH
+ Surround Back”, you can select the parameters.
Depending on the input signal, there may be signals that you
cannot select.
GDisplaying the Currently Playing Surround ModeH
Input signal Display
DOLBY DIGITAL
(other than 2ch)/
DOLBY DIGITAL EX
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL+PLgx CINEMA
DOLBY DIGITAL+PLgx MUSIC
DOLBY DIGITAL+PLgz HEIGHT z1
DOLBY DIGITAL Plus
DOLBY DIGITAL+
DOLBY DIGITAL+ +EX
DOLBY DIGITAL+ + PLgx CINEMA
DOLBY DIGITAL+ + PLgx MUSIC
DOLBY DIGITAL+ + PLgz HEIGHT z1
DOLBY TrueHD
DOLBY TrueHD
DOLBY TrueHD+EX
DOLBY TrueHD+PLgx CINEMA
DOLBY TrueHD+PLgx MUSIC
DOLBY TrueHD+PLgz HEIGHT z1
DTS (5.1ch)/
DTS-ES Discrete 6.1/
DTS-ES Matrix 6.1/
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+PLgz HEIGHT z1
DTS+NEO:6
DTS ES MTRX6.1 z2
DTS ES DSCRT6.1 z3
DTS 96/24 z4
DTS-HD
DTS-HD HI RES
DTS-HD MSTR
DTS-HD+NEO:6
DTS-HD+PLgx CINEMA
DTS-HD+PLgx MUSIC
DTS-HD+PLgz HEIGHT z1
DTS EXPRESS
PCM (multi ch)
MULTI CH IN
MULTI IN+PLgz HEIGHT z1
MULTI CH IN 7.1
z1 You can select this when the “Speaker Assign” setting on the
GUI menu is “5.1CH + Front Height” (vpage 53).
z2 This is displayed when the input signal is “DTS-ES Matrix 6.1”
and this unit’s “AFDM” setting is set to “ON” (vpage 49).
z3 This is displayed when the input signal is “DTS-ES Discrete
6.1”.
z4 This is displayed when the input signal is “DTS 96/24”.
For details, see page 68.
n
•
Surround Playback Using more
than 2.1-channel Speakers
The selectable surround modes depend on the following:
Format of the audio signals being input
Number of channels of the audio signals being input
The set speaker assignment (vpage 53)
1
Playing the source (vpage 20).
Front
2
Press SURROUND to select the
surround mode.
STEREO
This is the mode for playing stereo. Sound is
output from the front left and right speakers and
subwoofer.
z
This mode is for surround playback aligned with
the source.
MULTI CH
STEREO
This is an original DENON surround mode. This
mode is for enjoying stereo sound from all
speakers.
ROCK ARENA
This is an original DENON surround mode. This
mode is for enjoying the atmosphere of a live
concert in an arena.
JAZZ CLUB
This is an original DENON surround mode. This
mode is for enjoying the atmosphere of a live
concert in a jazz club.
The displayed surround mode changes depending on factors
such as the input signal and speaker settings (vpage 69).
z
•
•
•
3
GWhen “z” was selected in Step 2H
Press PARAMETER to select a mode
aligned with the source.
Rear
The modes that can be selected depend on the input source being
played.
•
When Performing Surround Playback for a
2-channel Source
n
DOLBY PLg
Cinema
z1
The signals are decoded in DOLBY PLg for
surround playback. This mode is suited for movie
sources.
DOLBY PLg
Music
z1
The signals are decoded in DOLBY PLg for
surround playback. This mode is suited for music
sources.
DOLBY PLg
Game
z1
The signals are decoded in DOLBY PLg for
surround playback. This mode is suited for games.
DTS NEO:6
Cinema
The signals are decoded in DTS NEO:6 for surround
playback. This mode is suited for movie sources.
DTS NEO:6
Music
The signals are decoded in DTS NEO:6 for surround
playback. This mode is suited for music sources.
DOLBY PLgz
Height
z2
The signals are decoded in DOLBY PLgz for
surround playback. This is the Front Height
playback mode. You can select this when the
“Front Height” setting is “ON” (vpage 49).
z1 When the two conditions below are satisfied, signals are
decoded in DOLBY PLgx for surround playback. In this case,
the display shows “DOLBY PLgx”.
Set “Speaker Assign” to “5.1CH + Surround Back” (vpage
53).
Set “Speaker Configuration” – “Surround Back” to something
other than “None” (vpage 54).
z2 You can select this when the following 3 conditions are
satisfied.
Set “Speaker Assign” to “5.1CH + Front Height” (vpage
53).
Set “Speaker Configuration” – “Front Height” to something
other than “None” (vpage 54).
Set “Front Height” to “ON” (vpage 49).
•
•
•
•
•
