D-Link DWS-1008 CLI Manual 415
The following table describes the fields in the display:
Field Description
Channel
Channel on which the BSSID is detected.
Neighbor BSS/MAC
BSSID detected by the radio.
RSSI
Received signal strength indication (RSSI), in decibels referred to 1 milliwatt
(dBm). A higher value indicates a stronger signal.
See Also:
• set {ap | dap} radio auto-tune max-power
• set radio-profile auto-tune channel-config
• set radio-profile auto-tune channel-holddown
• set radio-profile auto-tune channel-interval
• set radio-profile auto-tune power-config
• set radio-profile auto-tune power-interval
• show auto-tune attributes
• show radio-profile
show dap boot-configuration
Displays information about the static IP address configuration (if any) on a Distributed AP.
Syntax: show dap boot-configuration dap-num
dap-num
Defaults: None.
Access: Enabled.
Number of a Distributed AP for which to display static IP configuration
information.
