Setting Up the Projector 13
Amplifying Computer Audio
Your laptop probably has its own sound system, but if you need more
volume, you can connect a computer audio cable to use the projector’s
built-in amplifier and speaker. You can obtain a computer audio cable
(3.5-mm stereo miniplug cable) from a computer or electronics dealer.
1. Connect one end of the audio cable to the
Audio In
jack on the
projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or audio-out jack. (Jack locations vary; see
your computer manual if you’re not sure which jack to use.)
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 20 for instructions.
52c.book Page 13 Wednesday, October 9, 2002 2:32 PM
