A SERVICE OF

logo

16 Setting Up the Projector
Connecting an S-Video Cable
If your video source has an S-Video jack, you can use it to project a
higher quality video image. You’ll need an S-Video cable, which may
be included with your video source or can be purchased at an
electronics store.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Insert one end of an S-Video cable into the projector’s
S-Video
port.
2. Insert the other end into the S-Video output port of your video
source.
52c.book Page 16 Wednesday, October 9, 2002 2:32 PM