48 Maintaining and Transporting the Projector
Replacing the Remote Control Battery
Follow these steps to replace the battery:
1. Press the tab towards the center of the remote and slide the
battery tray out of the remote control.
2. Remove the old battery and insert a CR2025 watch battery as
shown.
3. Slide the battery tray back into the remote.
caution
When replacing batteries,
take the following
recautions:
■
Replace the battery as soon
as it runs out. If the battery
leaks, wipe away battery
luid with a soft cloth. If
luid gets on your hands,
wash them immediately.
■
Do not expose batteries to
heat or flame.
■
Dispose of used batteries
according to local regulations.
■
Remove the battery if you
won’t be using the projector
or a long period of time.
Tab
52c.book Page 48 Wednesday, October 9, 2002 2:32 PM
