Fine-tuning the Projector 33
Changing Menu Settings
Use the buttons on the remote control to access the menus and change
settings. Follow these steps:
1. Press the
Menu
button on the remote control to display the main
menu screen:
The menus are listed on the left, and the options available for the
highlighted menu are shown on the right.
2. Press up or down on the directional (arrow) buttons to scroll
through the menu list.
3. When the menu you want is highlighted, press the
Enter
button
to select it. The highlight moves to the first option for that menu.
4. Use the directional buttons to scroll through the list of options.
(If a computer or video source isn’t connected, certain options
may be unavailable.)
5. Use the directional buttons and
Enter
button to change the
setting for the selected option. Enabled settings have a green
highlight.
6. Press the
ESC
button to return to the main menu. Your changes
are saved automatically.
7. Press
ESC
again (or the
Menu
button) to exit the menu system.
S-Video/VideoComputer
Menu
A/V Mute
E-Zoom
Freeze
Color Mode
Power
ESCAuto
Enter
Menu Directional buttons
: Select : Enter
Video
Audio
Setting
Advanced
About
Reset All
Input Signal
Color Mode
Position
Tracking
Sync .
Brightness
Contrast
Sharpness
Auto Setup
Reset
:
:
:
:
:
:
:
Select
Adjust
0000
0
0
0
RGB
YUV( YCbCr YPbPr)
Execute
+
-
+
-
0
+
-
ON OFF
[Normal ]
Menus
Menu options
note
If you want to go back to the
default settings on any
menu, select
Reset
, press
Enter
, select
Yes
, and then
press
Enter
.
52c.book Page 33 Wednesday, October 9, 2002 2:32 PM
