Solving Problems 53
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the status lights on top of the
projector and try the solutions recommended below.
Status Lights
Power
ower
g
t
Warning light
Power
light
Warning
light Status Description
Green Off Operating The projector is operating normally.
Flashing green Off Warming up The projector is warming up. Wait for the
image to appear.
Green Flashing orange Lamp warning The lamp is almost burned out. This is a good
time to replace it. See page 44 for instructions.
Orange Off Sleep mode The projector is in sleep mode. You can unplug
it or press the PPower button to turn it on.
Flashing orange Off Cooling down The projector is cooling down. Wait for the
light to become solid before unplugging it.
Flashing orange Flashing orange
(quickly)
High
temperature
warning
The projector is too hot. Make sure the
temperature surrounding the projector does
not exceed 95
°F and there is plenty of space
around and under the projector for ventilation.
Clean the air filter, if necessary. See page 43
for instructions.
52c.book Page 53 Wednesday, October 9, 2002 2:32 PM
