Using the Projector 27
Adjusting the Image Shape
If the projected image isn’t rectangular or has a “keystone” shape, do
one or more of the following:
■
If your image looks like or , you’ve placed the
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
■
If your image looks like or , you need to adjust the
keystone correction value:
Press the or side of the
Keystone
button on the
projector to correct the shape of the image. After correction, your
image will be slightly smaller.
You can also perform electronic keystone correction using the
projector’s Setting menu. See page 37.
52c.book Page 27 Wednesday, October 9, 2002 2:32 PM
