Attaching the Projector Lens Unit
Attaching
Attention
• Do not attach the lens unit when the projector's lens insertion section is
facing up. Dust or dirt could enter the projector.
• Try not to touch the lens section with your hand or fingers. If fingerprints or
oils are left on the surface of the lens, projection quality deteriorates.
a
To make sure that keystone correction is performed correctly, set the
Lens Type in the Configuration menu according to the lens you are
using.
s Extended - Operation - Advanced - Lens Type p.122
a
Remove the lens replacement cover.
Lightly press the lens replacement cover. When the rear part rises,
remove the lens replacement cover.
b
Turn the lock lever counterclockwise.
c
Insert the lens unit straight into the lens insertion section with the
white circle on the lens on top.
Installing the Projector
26
