Frame Interpolation (EB-Z10005U/EB-Z10000U/EB-Z9875U/EB-
Z9870U/EB-Z9750U only)
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
Make settings in the Configuration menu.
s Signal - Frame Interpolation p.119
You can select the level of interpolation from Low, Normal or High. Set to
Off if noise occurs when setting an interpolation level.
Projecting 3D Images
By using two projectors, you can project passive 3D images. You need the
following optional items to project and view 3D images. Make sure you
read the notes in the user's guides supplied with the optional items.
• Polarizer (ELPPL01)
This is only available for standard zoom lens ELPLS04, middle throw
zoom lens ELPLM06, and long throw zoom lens ELPLL07.
• Passive 3D Glasses (ELPGS02A/ELPGS02B)
• Frame (ELPMB44)
s "Optional Accessories" p.198
When projecting 3D images, set 3D Images to On in the Configuration
menu.
s Signal - 3D Setup - 3D Images p.119
The following color modes are available when projecting 3D images. When
projecting using the optional 3D polarizers (ELPPL01), you can view images
at their optimal color tint.
• 3D Dynamic
• 3D Presentation
• 3D Theatre
• 3D Multi-Projection
s "Selecting the Projection Quality (Selecting Color Mode)" p.70
a
This projector arranges the polarizing direction of projection for R
(red), G (green), and B (blue). It is not necessary to inverse left and
right eye G (green) image signals.
Adjusting Projected Images
78
