e
Press the [Menu] button to finish making settings.
a
• When you change the Screen Type, adjust the aspect ratio for the
projected image as well.
s
"Changing the Aspect Ratio of the Projected Image" p.72
• This function does not support Message Broadcasting (an EasyMP
Monitor plugin).
Adjusting the position of the image on the projected screen
You can adjust the position of the image if there are margins between the
edge of the image and the projected screen frame due to the Screen Type
setting.
a
The Screen Position cannot be adjusted in the following situations.
• If you are using a WUXGA/WXGA projector and the Screen Type
is set to 16:10
• If you are using an XGA projector and the Screen Type is set to
4:3
Example: If you are using a WUXGA/WXGA projector and the Screen
Type is set to 4:3
You can move the image to the left and right.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.114
b
Select Display from Extended.
c
Select Screen Position from Screen.
d
Use [ ][ ][ ][ ] buttons to adjust the position of the image.
You can check the current display position by using the background
test pattern.
e
Press the [Menu] button to finish making settings.
Installing the Projector
33
