A SERVICE OF

logo

a
Press the [Lens Shift] button.
Using the remote control Using the control panel
b
Press the [ ][ ][ ][ ] buttons to adjust the position of the
projected image.
Using the remote control Using the control panel
c
Press the [Esc] button to finish the adjustment.
Adjusting the tilt of the projected image (for normal installment)
Extend and retract the front feet and rear feet to adjust the projector's
horizontal and vertical tilt. You can adjust within a range of ±3.5°.
A
Extend the front feet and rear feet.
B
Retract the front feet and rear feet.
Attention
The front feet and rear feet can be attached and removed. Note that the feet
will detach if they are extended more than 10 mm.
Installing the Projector
36