Administering the Kerberos Server
Adding Principals to the Database
Chapter 8 145
Adding Multiple Principals with Similar Settings
To simultaneously add multiple principals with the same setting,
complete the following steps:
Step 1. In the HP Kerberos Administrator window, select the Realm in which
you want to add multiple principals.
Step 2. Click New to display the Principal Information window as shown in
Figure 8-2.
Step 3. Enter the first principal name in the Principal Information window.
Step 4. Select the targeted settings for the principal in the General, Password,
and Attribute tabs of the Principal Information window.
Step 5. Click Apply to display the Change Password window.
Step 6. Enter the initial password for the new principal and click OK.
The new principal entry is saved in the principal database and the
Principal Information window is still open
Step 7. Enter another principal name in the Principal Information window, and
repeat the steps 5 through 7 until you finish adding all the prinicpals.
Step 8. When you have added all the new principals with the common attributes,
click OK or Cancel to close the Principal Information window.
For additional information about adding a principal, see “Loading
Default Values for a Principal” on page 152 and “Setting Administrative
Permissions” on page 188.
