4.4.6 OpenVMS InfoServer and the Integrity servers on the Same LAN . . . 4–5
4.4.7 EFI Firmware ........................................... 4–5
4.4.8 Management Processor .................................... 4–5
4.4.9 OpenVMS TCP/IP Provisioning Limitation . . ................... 4–5
4.4.10 Limitation with Deploying OpenVMS on Multiple Target Servers
Simultaneously .......................................... 4–6
4.5 Insight Dynamics - Virtual Server Environment for OpenVMS ......... 4–6
4.5.1 Utilization Data Collection Fails . ............................ 4–6
4.5.2 Problem While Creating a New or Replacement Simulated System . . . 4–7
4.5.3 Utilization Data not Available for OpenVMS Sub-OS Workloads . . . . . 4–7
4.5.4 Insight Software Features not Supported on OpenVMS . ........... 4–7
4.6 Performance Enhancements .................................... 4–8
4.6.1 Enhancements to Write Bitmaps . ............................ 4–8
4.6.1.1 WBM_MSG_INT Parameter Updates ....................... 4–8
4.6.1.2 WBM_MSG_UPPER and WBM_MSG_LOWER Parameter
Updates . ............................................ 4–8
4.6.1.3 Asynchronous SetBit Messages ........................... 4–9
4.6.1.4 Reduced SetBit Messages for Sequential I/O ................. 4–9
4.6.2 Exception Handling Performance Improvements (Integrity servers
Only) .................................................. 4–9
4.6.3 Exception Handling (Integrity servers Only) . ................... 4–9
4.6.4 Image Activation (Integrity servers Only) . . . ................... 4–10
4.6.5 Global Section Creation and Deletion ......................... 4–10
4.6.6 Dedicated CPU Lock Manager . . . ............................ 4–10
4.6.7 Ctrl/T Alignment Faults .................................... 4–10
4.7 Error and Warning Messages from ACPI During Boot ................ 4–10
4.8 Large Device Name Support for Accounting Utility .................. 4–10
4.9 PAGED_LAL_SIZE New System Parameter ....................... 4–11
4.9.1 Paged Pool Lookaside Lists ................................. 4–11
4.10 2 TiB Disk Volume Support Restrictions .......................... 4–11
4.11 Configuring SAS Tape Drives ................................... 4–12
4.12 External SAS Disk Device Naming . . ............................ 4–12
4.13 External Authentication . . .................................... 4–12
4.13.1 External Authentication and Password Policy ................... 4–12
4.13.2 Integrity servers External Authentication Support ............... 4–13
4.13.3 SET PASSWORD Behavior Within a DECterm Terminal Session . . . . 4–13
4.13.4 No Password Expiration Notification on Workstations . ........... 4–13
4.13.5 Restriction in ACME_SERVER Process (Integrity servers only) . . . . . 4–13
4.14 Itanium Primary Bootstrap (IPB) Fails to Find the Valid Dump
Devices .................................................... 4–14
4.15 SHUTDOWN.COM Changes ................................... 4–14
4.16 OpenVMS Cluster Systems .................................... 4–14
4.16.1 Cluster over IP (IP Cluster Interconnect) ....................... 4–14
4.16.1.1 Software Requirements ................................. 4–14
4.16.1.2 Integrity servers Satellite Node and Bootserver in the Same
LAN................................................ 4–14
4.16.1.3 Alpha Satellite Node Requires LAN Channels With Disk
Server . . ............................................ 4–15
4.16.1.4 IPv6 Support ......................................... 4–15
4.16.1.5 Dynamic Host Configuration Protocol (DHCP) or Secondary
Address Support . . . .................................... 4–15
4.16.1.6 Multiple IP Interface Configuration ........................ 4–15
4.16.1.7 ifconfig Command Usage ................................ 4–15
4.16.1.8 Multiple Gateway Configuration .......................... 4–15
vi
