34
206-4218
Date and Time Configuration
By default, the OAT100R is synchronized with an NTP server and congured for the US Central
time zone. If the OAT100R is connected to the Internet, the NTP client will periodically update
the time setting on the OAT100R. If the OAT100R is not connected to the Internet, you also
have the option to disable NTP synchronization and specify date and time data manually.
1. Click on the down arrow at the right of the Time Zone eld in the Time Conguration
section of the System Setup screen, and select the appropriate time zone from the drop-
down list of options.
2. Select the appropriate NTP setting—Enable or Disable—by clicking the radio button at the
left of the appropriate option.
Note: Per your selection, certain of the Time Conguration elds will become inaccessible/
grayed out. If NTP is enabled, Data and Time elds will be grayed out; if NTP is disabled,
the NTP Server eld will be grayed out.
3. The next step depends on whether you enabled or disabled NTP:
• If you enabled NTP, type the IP address of the NTP server in the NTP Server eld.
• If you disabled NTP, complete the Date and Time elds to manually specify the date and
time for the OAT100R. Click on the down arrow at the right of each eld (Year, Month,
Day, Hour, Minute) to select the appropriate value from the drop-down list of options.
4. When you have completed the fields as required, click on the Set button at the bottom of
the Time Conguration section.
If you successfully changed the OAT100R time configuration, the system will display
at the bottom of the System Information display. The System
Information display will also show the updated information in the Time Zone and Current
Time elds, as applicable.
5. Click on the Reset button in the System Reset section of the System Setup screen if you
are ready to reset the system immediately (see “Reset the System” below for further
information).
Note: If you intend to modify additional conguration settings during the current session,
you may wait until all changes are complete before you reset the system.
Reset the System
1. Click on the Reset button in the System Reset section of the System Setup screen.
2. The system will display a pop-up window prompting for confirmation. Either:
• Click OK to initiate a reset of the OAT100R. The reset process, during which each of
the tuners will also be reinitialized, may take up to two minutes, after which the system
resumes normal operation.
• Click Cancel to return to the System Setup screen without resetting the OAT100R.
Conguration Options via GUI (Cont.)
